ASROCK P5B Pro Manual Del Usuario página 21

Tabla de contenido

ctor, it can still

use the 4-pin

HDMI_SPDIF Cable

(Optional)

A. black end

B. white end (2-pin)

2 . 7 Driver Installation Guide

2 . 7

Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical drive

first. Then, the drivers compatible to your system can be auto-detected and listed on

the support CD driver page. Please follow the order from up to bottom side to install

those required drivers. Therefore, the drivers you install can work properly.

2.8

Untied Overclocking T

Untied Overclocking Technology

Untied Overclocking T

This motherboard supports Untied Overclocking Technology, which means during

overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you

enable Untied Overclocking function, please enter "Overclock Mode" option of BIOS

setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is

untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can

operate under a more stable overclocking environment.

Please refer to the warning on page 8 for the possible overclocking risk

before you apply Untied Overclocking Technology.

ASRock P5B Pro Motherboard

Please connect the black end (A)

of HDMI_SPDIF cable to the

HDMI_SPDIF header on the

motherboard. Then connect the

white end (B or C) of

HDMI_SPDIF cable to the

HDMI_SPDIF connector of HDMI

VGA card.

C. white end (3-pin)

echnology

2 1

Tabla de contenido