Operation; Using The Battery As A Power Bank - Workzone MT03116 Manual Del Usuario

Operation

The light cannot be used during the charging process.
The light provides three levels of brightness (100%, 50%, and 25%).
1. To find out the battery's charging level, press the Battery level indicator button
to view the battery level indicator (see Fig. B).
4
If the battery is fully charged, all four lights on the battery level indicator
green. The lower the charging level, the lower the number of lit lights. Each light
represents 25% of the battery charge. The operating time on a fully charged battery
is approx. 2 hours.
2. Using the handle
3. To set up the light, unfold the handle in such a way that the light hits the area of
use at the desired angle.
4. To switch on the light, press the on/off switch
The LED shines at 100% brightness level.
5. To reduce the brightness, press the on/off switch very lightly.
The LED shines at 50% brightness level.
6. To further reduce the brightness, press the on/off switch very lightly once again.
The LED shines at 25% brightness level.
7. Press the on/off switch a third time to switch off the light.

Using the battery as a power bank

− Connect the device you would like to charge to the light via a USB charging cable
(not included) by plugging the USB connector into the USB port
16-869-IM-CONTENT-2020-WuK-8-print.indd 13
1 , carry the light to the desired location of use.
8 (see Fig. B).
6
Operation
3 shine
(see Fig. B).
13
12.12.19 09:34