Dust extractor
Power consumption
Maximum appliance socket connected load
Max. suction capacity (air), extractor/turbine
Max. vacuum, turbine
Filter surface area
Suction hose
Length of the net cable
Sound pressure level as per EN 60704-2-1 / Uncertainty K
Protection class
Container capacity
Dimensions L x W x H
Weight
The pictures for the functional description are on a
fold-out page at the beginning of the instruction
manual. When reading of the manual you can fold
out this page for having always an overview of the
machine.
[1-1]
Dust extractor
[1-2]
Storage box
[1-3]
Extractor hose
Consider the pictures on the fold-out page.
WARNING
Unauthorised voltage or frequency!
Risk of accidents
Observe the specifications on the machine's
name plate.
Observe country-specific regulations.
Extension Cord
If an extension cord is required, it must have suffi-
10
Technical data
only CT SYS HEPA
CT SYS HEPA with storage box
CT SYS HEPA with storage box
Functional description
Operation
15.6 x 11.7 x 6.2" (396 x 296 x 162 mm)
15.6 x 11.7 x 10.6" (396 x 296 x 270 mm)
[1-4]
Handle
[1-5]
Angle adapter
[1-6]
T-LOC latch for Systainers
[1-7]
Cold-device plug
[1-8]
On/Off switch
[1-9]
AUTO/MAN switch
[1-10] Appliance socket
cient cross-section to prevent an excessive drop in
voltage or overheating. An excessive drop in voltage
reduces the output and can lead to failure of the
motor. The table below shows you the correct cord
diameter as a function of the cord length for this
tool.
Total Extension Cord
Lenght (feet)
Cable size (AWG)
Use only U.L. and CSA listed extension cords.
Never use two extension cords together. Instead,
108 m³/h / 180 m³/h
96 static water lift (200 hPa)
4.08 ft² (3786 cm²)
D 1 1/16 x 3/32"
(D 27 mm x 3.0 m-AS)
16.4 ft (5.0 m)
67 dB(A) / 3 dB
1.19 gal. (4.5 l)
15.2 lbs. (6.9 kg)
25
50
100
18
16
14
8.3 A
12 A
IP X0
150
12