JB Systems MSD 900 Manual De Instrucciones página 8

ENGLISH
the loop.
 When a loop is programmed and you left it by pressing the OUT button, just press OUT again to restart
the loop. The point where you pressed OUT is now programmed as the new endpoint of the loop.
 When the loop is still playing, press the RELOOP button to restart the loop immediately. You can repeat
this several times to create a "Stutter" effect.
EDIT A LOOP:
You can edit both the begin and end points of your loops. With the RELOOP button (18) you can toggle
between edit intro and edit outro.
 EDIT LOOP OUTRO (loop end): When a loop is programmed, press the RELOOP button (18) for about
2 seconds to enter "LOOP OUTRO edit" mode. While the loop is seamlessly playing, the alphanumerical
display shows the time information of the loop endpoint. Use the jog wheel (4) to set the new loop
endpoint. To make things very easy you can hear your modifications to the loop endpoint continuously.
When the loop is perfect, press the LOOP OUT button to save the new loop endpoint and leave the
loop. OR you can press the RELOOP button (18) to edit the LOOP INTRO point.
 EDIT LOOP INTRO (loop begin): When a loop is programmed, press the RELOOP button (18) for
about 2 seconds to enter "LOOP OUTRO edit" mode and press it again to enter "LOOP INTRO edit".
You will hear very short loops as if you are searching for a CUE point on a CD-player while the
alphanumerical display shows the time information of the loop begin point. Use the jog wheel (4) to set
the new loop begin point. To save the new begin point and leave the edit function, press the LOOP IN
button (19) OR you can press the RELOOP button (18) again to adjust the LOOP OUTRO point again.
ABOUT MEMORIES
DIFFERENT MEMORIES:
Before we talk about using the memory, we have to know the difference between "track memory" and
"permanent memory":
 Track Memory: This is the memory where the MSD900 stores a set of up to four cue points and/or loops
for one track. You can set up a "track memory" for every single track on the memory card.
Example: your SD-Card contains 800 tracks  for every track you can store up to 4 cue points and/or
loops. This makes a total of 800 x 4 = 3200 cue points and/or loops on one SD-card!
 Permanent Memory: This is the large memory where all the cue points and loops are permanently
stored. In fact it's an indexed collection of "track memories". When you recall previously stored cue points
of a certain track, you make a transfer from "permanent memory" to "track memory".
USING THE "TRACK MEMORY":
STORING A MASTER CUE POINT:
There are 2 ways to set a master cue point:
 Press the IN button (19) during normal playback to set the new cue point ("CUE on the fly").
 Put the player in pause and use the jog wheel to search for the exact location for the cue point. Once this
location is found, press "IN" button to set the new cue point. (or press the PLAY/PAUSE button)
Once the cue point is programmed, just press the CUE button to recall it.
STORING A SIMPLE CUE POINT TO THE "HOT CUE" BUTTONS:
First press the MEMO button (16) to make the unit enter hot cue memory mode (MEMO button is lit).
 Press one of the four HOT CUE buttons (17) at the right moment during normal playback: the HOT CUE
button you just pressed turns to red colour to indicate that the desired cue point is stored. ("Cue on the
fly").
 Put the player in pause and use the jog/shuttle wheel to search for the exact location for the cue point.
Once this location is found, press one of the four HOT CUE buttons to set the new cue point: the HOT
CUE button you just pressed turns to red colour to indicate that the desired cue point is stored.
Once the cue point is programmed, just press the HOT CUE button to start playback from the stored cue
point.
STORING A LOOP TO THE "HOT CUE" BUTTONS:
This is very similar to storing a simple cue point. The only difference is that you have to put the MSD900 in
loop mode first. When the loop is playing, press the MEMO button to make the player enter hot cue memory
mode (MEMO button is lit). After this press one of the four HOT CUE buttons (17): the HOT CUE button you
JB SYSTEMS 11/78
®
OPERATION MANUAL
MSD-900
ENGLISH
just pressed turns to yellow colour to indicate that the loop, playing at that moment, is stored. You can store
up to 4 loops!
DELETE THE "HOT CUE" BUTTONS:
You can easily delete the contents of a HOT CUE button by simply storing a new cue point or loop to it. You
can also erase all four HOT CUE buttons together by pushing the MEMO button for more than 2 seconds.
You will notice that all 4 HOT CUE buttons turn dark to indicate that the HOT CUE buttons are empty.
USING THE "PERMANENT MEMORY":
For security reasons the cue points and loops stored in the HOT CUE buttons are not automatically stored to
the permanent memory. This means that if you recall a set of cue points and loops from permanent memory
to the HOT CUE buttons (which is track memory), you can change, edit and delete them as much as you
want. The permanent memory will not be affected until you make a backup of the HOT CUE buttons to
permanent memory.
STORING TO "PERMANENT MEMORY":
Press the CUE1 button (17) while you keep the MEMO button (16) pressed. The display shows "CUE
Backup" to indicate that the cue points and loops in the HOT CUE buttons for that track are stored to
permanent memory.
DELETE A TRACK IN "PERMANENT MEMORY":
Select the track that you want to delete. Press the MEMO button (16) until the display asks "DEL CUES?" if
you press the YES button (5), the track information will be deleted in the permanent memory.
RECALLING "HOT CUE POINTS/LOOPS" FROM PERMANENT MEMORY:
In the SETUP menu you can determine how you want the cue points to be loaded. For more information
please refer to "CUE MODE" in the chapter SETUP MENU.
SPECIFICATIONS
Power Supply: DC 6V / 1,5A ~ Special AC/DC adapter should be used!
Frequency response: 20-20.000Hz (+/-0.5dB)
THD + noise: <0.011% @ 1kHz, 0dB
S/N Ratio (IHF-A): >99dB @ 1kHz.
Player outputs: 2V @ 100kΩ
Mixer output: 2V @ 100kΩ
Tone controls: +10/-26dB @ 10kHz / 100Hz
Headphone: 80mW@32Ω
MP3 FORMATS:
MPEG1 Layer3 (ISO/IEC11172-3): mono / stereo sampled at: 32 - 44,1 - 48kHz
Bitrates: 32 – 320 Kbps
Bitrate modes: CBR (Constant Bitrate) or VBR (Variable Bitrate)
MPEG2 Layer3 (ISO/IEC13818-3): mono / stereo sampled at: 16 – 22,05 - 24kHz
Bitrates: 8 – 160 Kbps
Bitrate modes: CBR (Constant Bitrate) or VBR (Variable Bitrate)
MPEG2,5 Layer3: mono / stereo sampled at: 8 – 11,025 - 12kHz
Bitrates: 8 – 160 Kbps
Bitrate modes: CBR (Constant Bitrate) or VBR (Variable Bitrate)
Possible file extensions: .mp3 ~ .MP3 ~ .mP3 ~ .Mp3
Maximum MP3-file size: max 341MB or 233 minutes
ID3 tag compatibility: ID3v2 and earlier
Dimensions: 482 (W) x 132 (D) x 74.8 (H)mm
Weight: 2,2kg
Every information is subject to change without prior notice
You can download the latest version of this user manual on our website: www.beglec.com
JB SYSTEMS 12/78
®
OPERATION MANUAL
MSD-900