Suppression Of Automatic Stop; Activation Of The V-Live Function; Modification Of Audio Indication Threshold In Continuity Test; Default Configuration Of The Unit - PCE Instruments F 09 Manual De Instrucciones

3.12.8 Suppression of automatic stop

Hold the HOLD key pressed and bring the rotary switch
from the OFF position to the position
The unit emits a double beep then the
The selected configuration is memorised when the key is
released: the symbol remains lit continuously.
P
The unit returns to automatic stop mode when the switch
goes to the OFF position.

3.12.9 Activation of the V-Live function

Hold the HOLD key pressed and bring the rotary switch from
the OFF position to the V position.
The unit emits a double beep then the V and
flashes.
The selected configuration is memorised when the key is
released: the V symbol is then ON steady and the
flashes.
Proceed in the same way to suppress the V-Live function: the
symbol then goes OFF when the key is released.
3.12.10 Modification of audio indication threshold in
continuity test
Hold the Yellow key pressed and bring the rotary switch from
the OFF position to the position
The unit beeps, the Ω and
threshold value (40.0 by default).
Adjustment is then possible from 1 Ω to 40 Ω by successive
pressings on the yellow key (short pressure: progression of
1 Ω by 1 Ω; press and hold: progression of 10 Ω by 10 Ω).
Once the value is chosen, actuate the rotary switch to
memorise.

3.12.11 Default configuration of the unit

Hold the Yellow key pressed and bring the rotary switch from
the OFF position to A position.
The unit emits a double beep then all the segments of the
digital display and the symbol flash.
The default configuration is memorised when the key is
released: the display no longer flashes and the
disappears.
The default configuration is:
- Audio identification threshold: 40 Ω
- Auto cut-off: with
- V-Live function: none

3.12.12 Date of last calibration carried out on unit

Hold the MIN/MAX key pressed and bring the rotary switch
from the OFF position to the V position.
The unit emits a beep, then the calibration date of the unit is
displayed in the form "week - year" (SS.AA) as long as the
MIN/MAX key is pressed.
.
symbol flashes.
P
symbol
symbol
.
symbols go ON along with the
symbol
40
40