Freeman FS3DTI Manual Del Usuario página 4

MODEL: FS3DTI
AIR SUPPLY AND CONNECTION
Never connect to an air source that is capable of
exceeding the maximum pressure range of the tool.
Over pressurization of the tool could result in the
tool bursting, abnormal operation, breakage of the
tool or serious personal injury. Always verify prior to
using the tool that the air source has been adjusted
to the rated air pressure or within the rated air-pres-
sure range.
Only use clean, dry, regulated compressed air at
the rated pressure range marked on the tool.
Never attach a connector to the tool that can hold
pressure. If a fitting that holds pressure is connect-
ed it could hold a charge after the tool is discon-
nected from the hose. This could allow the tool to
be unintentionally activated and possibly cause
injury.
Always disconnect air supply:
1) When servicing the tool.
2) When tool is not in use.
3) When moving to a different work area.
06
HTTP://WWW.FREEMANTOOLS.COM
WARNING:
Inspect air connections for any wear
and damage before use. If connector is
damaged replace before using tool. Do
not exceed maximum pressure range. If
exceeded tool could burst and possibly
cause harm to user or other persons in
work area. Make sure that hose is not
kinked, twisted or knotted before use.
WARNING:
If any parts are missing do not operate
this tool until the missing parts are
replaced. Failure to do so could result in
possible serious personal injury.
UNPACKING
This tool has been shipped completely assembled.
Carefully remove the tool and any accessories
from the box.
Inspect the tool carefully to make sure no breakage
or damage occurred during shipping.
1-888-669-5672
MODEL: FS3DTI
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
If any parts are damaged or missing, please call
1-888-669-5672.
WARNING:
Do not attempt to modify this tool or
create accessories not recommended
for use with this tool. Any such alteration
or modification is misuse and could
result in hazardous conditions leading to
possible serious personal injury.
SPECIFICATIONS
PRESSURE RANGE 0 - 100 PSI
RESOLUTION
0.1 PSI
ACCURACY
±1%
WORKING TEMP. -4°F to 158°F
POWER 2 AAA batteries
HTTP://WWW.FREEMANTOOLS.COM
FEATURES
TWO POSITION LEVER
For inflating and deflating.
BACKLIT LED DISPLAY WITH FOUR
MEASUREMENT OPTIONS: PSI, BAR, kPa, and
Kg/cm
LIGHTWEIGHT COMPOSITE CONSTRUCTION
Fiber reinforced nylon tool body for durability.
PROTECTIVE RUBBER COVERED GAUGE
For extra shock protection.
20" RUBBER SWIVEL HOSE
HEAVY-DUTY LOCK-ON AIR CHUCK
¼" NPT INDUSTRIAL BRASS FITTING
1-888-669-5672
07