General Characteristics; Return To Cembre For Overhaul - Cembre HT-TC0851 Manual De Uso

1. GENERAL CHARACTERISTICS

– Application range: is suitable for cutting copper, aluminium or telephone cables having a max.
– Rated operating pressure: ........................................................................................... 700 bar
– Dimensions: length ......................................................................................................... 652,5 mm (25.7 in.)
width .......................................................................................................... 175 mm
– Weight: ................................................................................................................................. 6,6 kg (14.5 lbs)
– Oil: .............................................................................................. ENI ARNICA 32
– Operating positions. The three operating positions are identified on the main handle, (04), which
rotates relative to the reference symbol
– Advancing speed. The tool auomatically switches from a fast advancing speed of blades to a
slower cutting speed.
– Safety. The tool is provided with max pressure valve; MPC1 special manometer, is available upon
request to check the proper setting of the valve.

2. RETURN TO Cembre FOR OVERHAUL

In the case of a breakdown contact our Area Agent who will advise you on the problem and give
you the necessary instructions on how to dispatch the tool to our nearest service Centre; if possible,
attach a copy of the Test Certificate supplied by Cembre together with the tool or fill in and attach
the form available in the "ASSISTANCE" section of the Cembre website.
3
HYDRAULIC CUTTING TOOL
HT-TC0851
diameter of .................................................................................. 85 mm
Rest position (Handles locked): lock handles together when tool is
not in use.
Release position: close the moveable handle (59) against the main
handle (04), in order to discharge the oil pressure and retract the
lower blade.
Operating position: operate the moveable handle (59), to build up
pressure and close the lower blade.
SHELL TELLUS OIL TX 32
(see Fig. 1).
ENGLISH
(3 - 3/8 in.)
(10,000 psi)
(5.6 in.)
or
or equivalent