BQS BL123 Manual De Uso página 11

11. Check that the buckle is properly fastened. It is important that
in the event of an emergency the child can be released quickly.
12.Make sure the seat does not become caught by the vehicle´s
door or reclining seat. Likewise, check that the seat is properly
and sufficiently fitted.
13. Never try to remove, change or add pieces to the seat or
harness since their basic and security functions may be
seriously affected.
14. Always fasten this safety seat into the vehicle with the seat belt,
even when not in use. Never leave your child unattended when
seated or not.
15. Contact our Customer Service for any question about installing
this child safety seat: +34 943 833 013.
16. Please keep this safety seat away from corrosive products.
17.The manufacturer guarantees the quality of its products but not
the quality of second-hand products or those registered under
other trademarks.
18.The illustrations in this instructions booklet are for information
purposes only. The child restraint may have small differences
from the photographs or images in this instructions manual.
These variations do not affect its approval by ECE Regulation
44/04.
1. USE IN VEHICLES.
3-point lap and
diagonal seat belt
2-point lap seat belt
Only suitable for this
particular seat WHEN having
a lap and diagonal seat belt
(3 anchor points)
Child restraint system
20
Correct installation /
proper
Incorrect installation /
improper
Optional installation
BL123
2. SEAT PARTS AND FITTINGS.
A. Cover.
B. Group 2 and 3 vertical belt hook.
C. Harness pads.
D. Harness straps.
E. Boton de apertura de la hebilla.
F. Buckle release-button.
G. Harness adjustment button.
H. Harness adjuster strap.
I. Diagonal belt hook.
J. Childs´s seat base
K. Group 2 and 3 vertical belt hook.
L. Harness pad connector.
M.Group 1 vertical and diagonal belt hook.
N. Height adjuster lever.
O.Metal harness connector.
3. INSTALLING CHILD SEAT. GROUP 1.
Only suitable for Group 1, approx.
WARNING
9 months to 4 years of age (9-18 Kg.)
1. Fit this child seat into the vehicle´s seat, making sure it is firmly
pressed against the vehicle seat backrest (3.1).
2. Pass the vehicle diagonal shoulder belt below the headrest, pass
the lap belt through the I guide under the armrest, then slip the
belt through the M guides in the plastic backrest, pass the belt
once more through the I guide under the armrest and fasten the
safety belt to the vehicle anchor point. You will hear a "click" when
properly fastened (3.2, 3.3, 3.4 and 3.5).
3. Check that the seat belt is not twisted or tangled, that the lap
belt passes under the armrests and that the diagonal shoulder
belt passes under the headrest & above the armrests before
proceeding (3.6).
Group 1/2/3
EN
www.babyqs.com
21