Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Mounting
Before mounting this product, read the
Mounting Diagram
Mounting Procedure
1.
Insert alignment conicals into the alignment holes and allow magnets to connect.
2.
Insert the Rig Bar Speego locking bars into the female Speego connections on the F-Series panel.
3.
Twist the spring knob on the Rig Bar Speego by 90°, until it locks into place.
4.
Twist the tightening knob clockwise until F-Series panel is secure to the Rig Bar.
5.
To detach the Rig Bar from the F-Series panel, reverse the previous steps.
Warning! The magnetic attachments are not load-bearing, and are intended for alignment
assistance only. Do not release panel until the hanging hardware has been fully secured.
Technical Specifications
Dimensions and Weight
Length
21.07 in (528 mm)
Load Capacity
650 lb (295 kg)
Note: Dimensions in inches are rounded.
Ordering
Product Name
RB-F50CM
RB-F50CM QRG Rev. 1
QUICK REFERENCE GUIDE
Safety
Notes, as well as those for the attached products.
Width
4.7 in (119 mm)
Item Name
RB-F50CMX2
Alignment Conical (x2)
Rig Bar
Locking Latch
Male Speego
connection
Rig Bar
Locking Tab
Height
17.3 in (439 mm)
Recommended Shackle
Item Code
9111249
Rig Bar Speego
Spring
Tightening
Knob
Knob
Locking
Bar
Do NOT Hang
sideways from
Truss
Weight
4.6 lb (2.1 kg)
5/8"
UPC Number
781462215972
EN
2
Publicidad
Tabla de contenido
