Front Panel Display; Displays During Operation; Loading The Batteries - Denon DVD-757 Instrucciones De Funcionamiento

FUNCTIONAL OVERVIEW

Front Panel Display

Lights up when the progressive scan system is activated.
Lights up when the disc playback comes to a pause.
Lights up when playing back in slow mode. (DVD)
Lights up when the inserted disc is being play back.
The present display state is shown.
• TL./GR.: Title or Group
• TR./CP.: Track or Chapter
To change to the display of a title please push
the DISPLAY button in the state of Resume.
Displays the chapter (title) or track
number. In case the chapter (title) or
track number is over 100, displays
"_ _".

Displays During Operation

NOTES:
• The front panel display has blinked while setting the
program playback.
• "P**-●●●" is displayed in the front panel display while
setting the program playback. ("**" is program number,
"●●●" is track number.)
• "A" is displayed in front panel display while selecting the
audio file (CD, MP3, WMA).
Power on
No disc inserted or
cannot read
Tray open
Tray closed
Loading the Disc
Power off
HDMI output mode
(480p) is selected
HDMI output mode
(720p) is selected
HDMI output mode
(1080i) is selected
HDMI output mode
(1080p) is selected
HDMI output mode
(OFF) is selected
Program playback is
set
Program playback setting
group (folder) is selected
Program playback setting
ALL CLEAR is selected
Random playback is
set
All group playback
is set
– 10 –
Displays a type of the disc which is on the tray.
• DVD: DVD-Video
• DVD A: DVD-Audio
• CD: Audio CD, MP3, JPEG, WMA
Lights up when the repeat function is on.
SACD: Super Audio CD
Lights up when the ALL repeat function is on.
SACD
Lights up when the A-B repeat function is on.
Lights up when you have selected the
audio file (CD/MP3/WMA) on the
program screen.
Displays the elapsed time of the chapter (title) or track.
(The display of 10 hours or more cannot be performed.)
Selected HDMI output mode is displayed.
• "F-***" is displayed in the front panel display while selecting
the group (folder). ("***" is group (folder) number.)
• "A-CLEAr" is displayed in the front panel display while
selecting ALL CLEAR.
• "SHUFFLE" is displayed in the front panel display while
setting the random playback.

Loading the Batteries

1. Open the battery compartment cover.
2. Insert two "AA" (R6P) batteries, with each
one oriented correctly.
3. Close the cover.
Cautions On Batteries
• Use "AA" (R6P) batteries in this remote control unit.
• Replace the batteries with new ones approximate-
ly once a year, though this depends on the fre-
quency with which the remote control unit is used.
• If the remote control unit does not operate within a
close proximity of the main unit, replace the batteries
with new ones, even if less than a year has passed.
• The included batteries serve only for verifying operation.
Replace them with new batteries as soon as possible.
• When inserting the batteries, be careful to do so in
the proper direction, following the
in the remote control unit's battery compartment.
• To prevent damage or battery fluid leakage:
• Do not mix a new battery with an old one.
• Do not mix two different types of batteries such
as alkaline and manganese.
• Do not short-circuit, disassemble, heat or dis-
pose of batteries in flames.
• Remove the batteries when not planning to use
the remote control unit for a long period of time.
• If the batteries should leak, carefully wipe off the fluid from the
inside of the battery compartment, then insert new batteries.
and marks
EN