Centuro S4
| Scooter
4.7. Disassembling for storage
For storage, you must also remove the batteries, be extremely careful.
Avoid handling metal tools, touching the battery terminals and observe
the instructions of the battery manufacturer.
33
•
You will first need to remove the seat and the panel.
•
Remove the seat by pulling it upwards.
34
•
The panel is fixed in place with 2 hand screws.
•
Undo these screws and remove the panel.
•
Disconnect the plug connection for the rear lighting.
•
The batteries should then be removed. To make this easier, the
cables are fitted with plug connections.
•
Disconnect the plug connections (Fig. 34) for both batteries.
•
Then undo the screw on the mounting bracket (Fig. 35). You do not
need to completely remove the screw in order to do this
35
36
60
This work should only be done by a trained technici-
an. There is danger of fatal injury!
For your safety, the seat must be lifted by two peop-
le, as it is the heaviest individual part (16,5 kg).
4.8. Taking on public transport
According to a decree from 2017, your scooter is not suitable to be
taken on public transport (ÖPNV) and is not authorised to bear the
corresponding sticker (Fig. B)
Bischoff & Bischoff GmbH |25.11.2019 - Revision: 1
Centuro S4
Scooter |
B
61