Perel CFANT01N Manual Del Usuario página 4

The device is fitted with an overload cut-out circuit which will operate of the motor overheats
or is stalled. If the device overheats or stalls, disconnect from the mains immediately and
allow the motor to cool down.
Do not connect the device to a dimmer, programmer, timer or other device that could turn on
the fan automatically.
Never operate or touch the device with wet hands!
Class 2 appliance.
3. General Guidelines
Refer to the Velleman
Protect this device from shocks and abuse. Avoid brute force when operating the device.

Familiarise yourself with the functions of the device before actually using it.

All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.

Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.

Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.

Due to constant product improvements, the actual product appearance might differ from the shown
images.

Product images are for illustrative purposes only.

Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.

Keep this manual for future reference.
4. Overview
Refer to the illustrations on page 2 of this manual.
A control panel
B front shell
C grille
D foot
V. 02 – 15/01/2018
® Service and Quality Warranty on the last pages of this manual.
CFANT01N
E timer
F speed switches
G oscillation switch
4 ©Velleman nv