Loading And Layout Advice - ARTEVINO OXG1T230NPD Modo De Empleo

Ocultar thumbs Ver también para OXG1T230NPD:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 26

Loading and layout advice

Each shelf can be used as a storage shelf, sliding shelf or display shelf. The shelves in your cabinet have 12
recesses, allowing your bottles to be stored safely.
1
2
3
Shelf specially developed for wine cabinets in the Oxygen range.
14 dowel pins supplied in the accessories bag.
Installing a shelf in storage version:
To install bottles on a storage shelf, proceed as follows:
1.
position one runner on the right and one runner on the left (see
diagram 1). Ensure that the runners are correctly fixed in their
housing (see diagram 2)
2.
3.
located at the front of the shelf, in the upper section.
These pins then fix the shelf with respect to the runner and
prevent any unwanted movement.
4.
the base of the bottle towards the back.
5.
the front row.
6.
the back wall.
Schéma 1
Diagram 1
7.
12 bottles, i.e.72 traditional Bordeaux bottles
Schéma 2
Diagram 2
Diagram 3
N.B:
For optimal use of your storage shelf, attach the rubber studs to the rear of the shelf, one on the
left, the other on the right, ensuring that no bottles touch the back wall.
10
1
Runners (x2)
2
Shelf - 12 recesses
3
Dowels (x2)
Insert 2 runners in the shelf support strips. For each shelf,
Place the shelf in the 2 runners. (see diagram 3)
Place a locking dowel in each of the 2 holes
Start by placing bottles in each recess of the back row with
Continue by placing the bottles in the opposite direction on
Continue stacking the bottles, ensuring that no bottles touch
A storage shelf can support a maximum of 6 rows of
(97 kg).
Installing a shelf in display version:
To install bottles on a display shelf, proceed as follows:
1.
Insert 2 runners in the shelf support strips. For each shelf, position one runner on the right and
one runner on the left (see diagram 1 and 2).
2.
Place the shelf in the 2 runners. (see diagram 3)
3.
Place a locking dowel in each of the 2 holes located at the front of the shelf, in the upper section.
These pins then fix the shelf with respect to the runner and prevent any unwanted movement.
4.
Start by placing bottles in each recess of the back row with the base of the bottle towards the
back (6 traditional Bordeaux bottles).
5.
Continue stacking the bottles on the back row
(6+6+6+6 = 24 traditional Bordeaux bottles), ensuring that no
bottles touch the back wall.
6.
To display your bottles, place them vertically at the front of the shelf
(maximum capacity : 6 traditional Bordeaux bottles)
7.
In display version, the shelf has a maximum capacity of 30
traditional Bordeaux bottles.
Installing a shelf in sliding version:
To install bottles on a sliding shelf, proceed as follows
1.
Insert 2 runners in the shelf support strips. For each shelf, position one runner on the right and
one runner on the left. (see diagram 1 and 2).
2.
Place the shelf in the 2 runners. (see diagram 3)
3.
Place a locking dowel in each of the two holes located at the back of the shelf, in the upper
section. These pins prevent the shelf from sliding all the way out of the cabinet
4.
Start by placing bottles in each recess of the back row with the base of the bottle towards the
back.
5.
Continue by placing the bottles in the opposite direction on the front
row.
6.
A sliding shelf can only hold a single row of bottles (maximum
of 12 traditional Bordeaux bottles).
7.
In the case of a mixed layout, for optimal accessibility, we recommend
that you place the sliding shelves in the central section of the appliance.
NEVER PULL OUT MORE THAN ONE LOADED SLIDING SHELF AT A TIME.
Installing the specific grid for beverages
temperatures model - OXY2TVD6COUS)
1.
Place a universal ArteVino shelf in the beverage center.
2.
Place the grid on the ArteVino shelf (see diagram 4).
3.
Install your bottles and cans upright on the grid.
NB: Additional information, for the small model only.
The small model is delivered with 2 shelves. 1 shelf fixed on runners + 1 shelf placed
on 2 fixed rack support pins.
To change the latter to sliding or display version,
Remove the shelf from the cabinet,
Remove the 2 rack support pins,
Take the 2 runners supplied with the cabinet,
Insert the 2 runners in the desired location, in the shelf support strips (see diagram 1 and 2),
Then follow the installation stages provided in the previous paragraphs.
If you do not have enough bottles to fill your wine cabinet, it is preferable to spread the load over the
entire cabinet rather than placing bottles "all at the top" or "all at the bottom". For optimal performance,
we recommend that you use the cabinet at over 75% of its capacity.
(only available on the 2
Diagram 4
GB
11

Publicidad

Tabla de contenido
loading

Tabla de contenido