Operating Tips; Care And Cleaning - Maytag Performa IntelliDry PYE4500 Serie Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating Tips

Clean the Lint Filter
• After each load.
• To shorten drying time.
• To operate more energy efficiently.
Note: Do not operate the dryer without the lint filter
in place.
Care & Cleaning
Control Panel
Clean with a soft, damp cloth. Do not use abrasive sub-
stances.
Tumbler
Remove any stains (such as crayon, ink pen or fabric
dye) with soap and water. Then tumble clean old tow-
els or rags to remove any excess stain.
Cabinet
Wipe off any marks with soap and water. Use an appli-
ance wax once a year if desired.
Dryer Exhaust System
Inspect and clean once a year to maintain optimum per-
formance. The outside exhaust hood should be cleaned
more frequently to ensure proper operation. (Refer to
the Installation Instructions for more information.)
5
Load the Dryer Properly
• Place only one washload in the dryer at a time.
• Mixed loads of heavy and lightweight clothes will
dry differently. Lightweight clothes will dry, while
heavy clothes may be damp.
• Add one or more similar items to the dryer when
only one or two articles need drying. This improves
the tumbling action and drying efficiency.
• Overloading restricts tumbling action, resulting in
uneven drying as well as excessive wrinkling of
some fabrics.
Replacing the Drum Light
1) Unplug or disconnect the dryer from the power
supply.
2) Lift top of dryer by inserting a putty knife under top,
4˝ in from each side.
3) Rotate bulb holder to vertical position before remov-
ing bulb.
4) Push bulb down and rotate counterclockwise to
remove.
5) Replace with a 25 watt, 115/125 volt twist lock utili-
ty light Part No. 53-0570 or equivalent. Place bulb in
socket, push down and rotate clockwise.
6) Rotate bulb holder to horizontal position.
7) Place top of dryer back in original position. Make
sure metal tabs hold top in place.
8) Reconnect dryer to power supply.

Publicidad

Tabla de contenido
loading

Tabla de contenido