RISCO Group VUpoint RVCM32W Guia De Instalacion página 22

The following screen appears.
Figure 23 Enable UI/CGI Option
2. Select the UI/CGI checkbox.
3. Click Save.
The installer is now provided with access to the Web interface of the IP Camera
for a duration of one hour. Open an Internet browser and enter the IP address of
the camera. By Default, the Username and Password for the IP Camera login is
"admin" and "_AdmiN_+ IP Camera MAC address" (for example,
AdmiN_AABBCCDDEEFF).
NOTE: After one hour, access to the camera will be disabled.
Connecting to a Local Network Video Recorder (NVR)
The installer can connect the IP Camera to a local NVR. The installer must
determine the IP Address of the IP Camera and configure it as an ONVIF camera
in the NVR. In addition, the installer must enter the IP Camera's credentials.
By Default, the Username and Password for the IP Camera login is "admin" and
"AdmiN_+ IP Camera MAC address" (for example,
_AdmiN_AABBCCDDEEFF). The same credentials are used for the ONVIF
camera.
The installer can now also access the live stream from the IP Camera.
NOTE:
Changes performed on the default IP Camera settings are at the responsibility of
.
the installer
20