Escalade Sports ping-pong T8674 Manual Del Propietário página 3

1A. Attach Caster Wheels (#9 & #10) to Caster Beam. Slide a Caster
Wheel with Lock (#10) through Caster Beam (#8) and secure it with a
Push Nut (#11) as shown in Figure 1. Gently tap the Push Nut (#11)
with a hammer to secure it in place. On the other end of the Caster
Beam attach a Caster Wheel without Lock (#9). Make sure you have
one Caster Wheel with Lock and a Caster Wheel without Lock for each
Caster Beam. Repeat step for second Caster Beam.
1B. Attach Tube Plugs (#14) to Caster Beam (#8) as shown in Figure 1.
2. Lay Support Plates (#43) on Caster Beam (#8) to line up holes, the
distance between middle holes to side holes is different, see Front
View of Figure 2. Attach Stop Spools (#12) and Support Plates
(#43) to side of Caster Beam without logo with Bolts (#13) and Nuts
(#28) but do not tighten completely. See Figure 2.
Repeat step for second Caster Beam.
13
Figure 2
Caster
with 10
Lock
Figure 1
8
12
43
28
READ AND FOLLOW ALL ASSEMBLY, OPERATING, AND
SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO (2)
ADULTS ARE NEEDED TO PUT THIS TABLE TOGETHER!
8
10
Match holes in Support Plate (#43)
Longer
15
"
1
64
3
CAUTION:
11
14
Caster
9
without
Lock
with Caster Beam (#8).
8
43
11
11
1
64 " 1 64 "
Shorter
Shorter
Front View
Longer
15
1 64 "
10