JVC DLA-RS66 Manual Del Usuario página 70

Remote control does not work
Check
Are the batteries correctly loaded?
Are the batteries exhausted?
Is there an obstructing object between
the remote control and remote sensor?
Is the remote control held too far away
from the unit?
Are the IR (infrared) 3D GLASSES and
3D SYNCHRO EMITTER in use?
Unable to view 3D images
Check
Is the power of the 3D GLASSES turned
on?
Are the 3D GLASSES charged?
Are the 3D GLASSES and 3D
SYNCHRO EMITTER too far away from
each other?
Is the correct 3D format selected?
Color does not appear or looks unnatural
Check
Is the AV device properly connected?
Is the image correctly adjusted?
Is the color space of the input signal
correctly set?
Video image is fuzzy
Check
Is the focus correctly adjusted?
Is the unit placed too near or too far away
from the screen?
Video images are missing
Check
Has screen mask been configured?
Is the display position misaligned?
70
Match the polarities (t s) correctly when loading the
batteries.
Replace with new batteries.
Remove any obstructing object.
Hold the remote control closer to the sensor during use.
As there is a possibility of signal interference, when you are
using the IR (infrared) 3D GLASSES together with the 3D
SYNCHRO EMITTER, try adjusting the orientation of the
3D SYNCHRO EMITTER.
If you are using the PK-AG2 or PK-AG33D GLASSES, turn
on the power manually.
Check the battery (charge) of the 3D GLASSES.
Position them at an appropriate distance.
If the format does not switch automatically, configure 3D
Format in the setting menu.
Connect the AV device properly.
Adjust "Color" and "Tint" accordingly.
Set "Color Space" properly.
Adjust the focus.
Set the unit at a correct distance from the screen.
Set "Mask" to "Off".
Alter the "Picture Position" value so that the entire image
appears on the screen.
Action
Action
Action
Action
Action
Refer to
p. 18
p. 18
p. 18
p. 18
p. 34
Refer to
Check the
instruction
manual of the 3D
GLASSES and
3D SYNCHRO
EMITTER.
p. 35
Refer to
p. 22
p. 50
p. 53
Refer to
p. 28
p. 77
Refer to
p. 54
p. 54