Campbell Hausfeld CL154500 Manual De Instrucciones De Operación página 5

Operation (Continued)
TO REMOVE A DRILL BIT:
Hold the ring and turn the sleeve
counterclockwise (See Figure 3).
Bit
Sleeve
Ring
Figure 3
CHUCK KEY DRILL OPERATION
Disconnect the
air line before
removing or installing a drill bit.
Tightening or loosening the drill bit with
air supply attached may cause injury.
Chuck Key
Hole
Bit
Drill Chuck
Figure 4 - Chuck Key
TO INSTALL A DRILL BIT:
Insert chuck key into one of the chuck
key holes. Turn chuck key backwards to
unlock jaws of drill (See Figure 5). Turn
chuck counterclockwise to open jaws
and insert bit. Turn key forward to lock bit
into place (See Figure 6).
Figure 5
Chuck Key
Figure 6
TO REMOVE A DRILL BIT:
Insert chuck key into chuck key
hole. Turn chuck key backwards to
unlock jaws of drill. Spin drill chuck
counterclockwise to open jaws then
remove bit (See Figure 5).
www.campbellhausfeld.com
CL154500, CL154600
Bit
Backward
Chuck
Turn key chuck
backward to
unlock chuck.
Forward
Turn key chuck
forward to lock
bit in place.
5