Periodic Filter Screen Cleaning - Pentair PROWLER 920 Guia De Instalacion

Periodic Filter Screen Cleaning

Note: It is recommended that you clean the filter screens at least once a month. Too much debris in the filter
screens will restrict the suction power of the Prowler™ 920 Robotic Pool Cleaner and reduce its effectiveness.
To dismantle and clean the four filter screens, follow the instructions given below.
STEP 1:
Remove the Filter Screen
Using your thumbs, firmly press inwards on the top of
Panel 1 to remove the filter screen from its frame. See
Figure 16.
Each filter screen is stamped with a number. see Figure 13.
Remove the filter screens in numerical order:
Screen 1 > 2 > 3 > 4.
Figure 16
Figure 17
MAINTENANCE
Clean the Filter Screen
Thoroughly clean the filter screen with a garden hose.
See Figure 18.
STEP 3:
Reassemble the Filter Screens
Replace the filter screens by seating the bottom of the
screen into its frame, then pushing firmly outwards on
the top of the screen until a click is heard.
Each filter screen is stamped with a number. See
Figure 16. Replace the filter screens in numerical order:
Screen 4 > 3 > 2 > 1.
PROWLER™ 920 Robotic Inground Pool Cleaner Installation and User' s Guide
STEP 2:
Figure 18
Figure 19
7