Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Don't cover or block the vents or grilles of your appliance.
If you're not at home for a long time
Turn off the refrigerator first and then unplug the unit from the wall outlet.
•
•
Remove all the food.
•
Clean the refrigerator.
Leave the lid open slightly to avoid possible formation of condensation, mold, or odors.
•
Use extreme caution in the case of children. The unit should not be accessible to child's play.
•
•
Short vacations: Leave the refrigerator operating during vacations of less than three weeks. c
Long vacations: If the appliance will not be used for several months, remove all food and unplug the
•
power ord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door
open slightly: blocking it open if necessary or have the door removed.
How to save energy
1)
Install the refrigerator in the coolest part of the room, out of direct sunlight and away from heating
ducts or registers. Do not place the refrigerator next to heat-producing appliances such as a range, oven
or dishwasher.
2)
The refrigerator door should remain open only as long as necessary; do not place hot food inside
the refrigerator.
3)
Organize the refrigerator to reduce door openings .Remove as many items as needed at one time
and close the door as soon as possible.
4)
The refrigerator door should be properly closed to avoid increased energy consumption, and the
formation of excess ice and / or condensation inside.
5)
Constantly circulating cold air keeps the temperature homogenous inside the refrigerator. For this
reason, it is important to properly distribute the food, to facilitate the flow of air.
6)
Cover foods and wipe containers dry before placing them in the refrigerator. This cuts down on
moisture build-up inside the unit.
7)
Do not overcrowd the refrigerator or block cold airvents. Doing so causes the refrigerator to run
longer and use more energy. Shelves should not be lined with aluminum foil, wax paper or paper
toweling. Liners interfere with cold air circulation, making the refrigerator less efficient, which could
cause food spoilage.
8)
During prolonged absences (example: vacations), it is advisable to disconnect the refrigerator,
remove all the food, and clean it . The door should be left slightly open to avoid mold and unpleasant
odors. This will not affect the refrigerator when it is reconnected.
9)
During short absences (example: holidays), the refrigerator can remain on. However, remember
that prolonged power outages may occur while you are gone.
Servicing
Simple fault analysis and elimination
Not every failure requires technical service personnel to solve the following simple small problem; you
can try to solve the problem.
Case
• Completely
non
refrigeration
• Abnormal
noise
• Poor
refrigerating
efficiency
• Peculiar
smell in
refrigerator
Inspection
• Is power plug off?
• Are breakers and fuses a broken?
• No electricity or line trip?
• Is refrigerator stable?
• Does refrigerator reach the wall?
• Do you put hot food or too much
food?
• Do you open the door frequently?
• Do you clip food bag to the seal of
door?
• Direct sunlight or near a furnace or
stove?
• Is it well-ventilated?
• Temperature setting in too high?
• Any spoiled food?
• Do you need to clean refrigerator?
• Do you packed food of strong
Solutions
• Re-plug.
• Opening the door and checking
whether the lamp is lit.
• Adjusting refrigerator's adjustable
feet.
• Off the wall.
• Putting food into refrigerator when
hot food becomes cool.
• Checking and closing the door.
• Removing the refrigerator from the
heat source.
• Emptying the distance to maintain
good ventilation.
• Setting to the appropriate
temperature.
• Throwing away spoiled food.
• Cleaning refrigerator.
• Packing food of strong flavors.
8
Publicidad
Tabla de contenido
