Features; Programming Track Numbers; Clearing The Program - Philips EXP 301 Manual De Instrucciones

Programming track numbers

You can select up to 50 tracks and store them in the memory in a desired
sequence.You can store any track more than once.
Select a track with ∞ or §.
1
2
Press PROGRAM to store the track.
is shown and P with the number
PROGRAM
of stored tracks is displayed.
3
Select and store all desired tracks in this way.
If necessary, press 9 to stop normal playback.
4
Press 2; to start playback of the program.
Playback of the program starts.
To add additional tracks to your program,
0 0
press 9 to stop playing the program and
continue with step 1.
You can review the program by pressing
0 0
PROGRAM for more than 3 seconds.
All stored tracks are displayed in sequence.

Clearing the program

If necessary press 9 to stop playback.
1
Press 9 to clear the program.
2
Clr is displayed,
and the program is cleared.
Notes:
The program will also be cleared if you open
the CD compartment or interrupt the power supply.
After storing 50 tracks, FULL is displayed.
disappears
PROGRAM

Features

PROGRAM
TITLE
PROGRAM
21