Reducing Video Noise; Selecting A Game Mode; Selecting A Screen Size Manually - Pioneer PDP-6010FD Manual De Instrucciones

Adjustments and Settings
Note
• To restore the factory defaults for all the items, press
select "Reset" in step 4, and then press ENTER. A confirmation
screen appears. Press /
ENTER.
• This function is not selectable when the PC is connected to the
HDMI terminal.

Reducing video noise

For the individual analog TV channels, you can specify whether
the plasma display should reduce video noise depending on the
levels of broadcasting signals.
1
Press HOME MENU.
2
Select "Option" ( / then ENTER).
3
Select "Tuner NR Setting" ( /
4
Select "Channel Map" ( / ).
You can select only analog channels set by the Auto Channel
Preset or POD.
5
Select "Tuner NR" ( / ).
6
Select "On" ( / ).
HTuner NR Setting ANT.A
Channel Map
Tuner NR
Channel Keep/Skip
Item Description
On (default)
Activates Tuner NR
Off
Deactivates Tuner NR
7
Press HOME MENU to exit the menu.
Note
• This function is only selectable when signals are received
through ANT.A or ANT.B.
• The "Channel Keep/Skip" menu is not selectable. "Keep" or
"Skip" is displayed when the setting in "Channel Map" is
changed.
• This function may not achieve satisfactory results, depending
on the conditions of broadcasting signals.

Selecting a game mode

When playing a game, you can use this function to establish a
preference for image quality or operability.
1
Press HOME MENU.
2
Select "Option" ( / then ENTER).
3
Select "Game Control Pref" ( /
/
to select "Yes", and then press
then ENTER).
7
On
Keep
then ENTER).
4
Select "On" or "Off" ( /
Item Description
to
On
Establishes a preference for operability
Off
Establishes a preference for image quality
5
Press HOME MENU to exit the menu.
Note
• The "Game Control Pref" is only available when using an
external input (except a PC source) and "GAME" is selected in
"AV Selection".
• The "Game Control Pref" options are not effective when PC
signals are received (when a PC source menu is displayed on
the screen).
• The "On" setting is not effective when freezing images or in the
multiscreen mode.

Selecting a screen size manually

In single-screen mode, press SCREEN SIZE to change the size of
the screen from among the selectable options for the type of
video signals currently received.
• The selectable screen sizes differ depending on the types of
input signals.
AV source
Item Description
4:3 For 4:3 "standard" pictures. A side bar appears on each
side
WIDE In this mode pictures are progressively stretched toward
each side of the screen
FULL
For 16:9 squeezed pictures
Dot by Dot
Matches input signal to the same number of screen
pixels (selectable for 1080i or 1080p signals only)
ZOOM
For 16:9 letterbox pictures. Bars may appear on the top
and bottom on some programs
CINEMA For 14:9 letterbox pictures. Bars may appear on the top
and bottom on some programs
PC source
Item Description
4:3 Fills the screen without altering the input signal aspect
ratio
FULL Full 16:9 screen display
Note
• While watching High Definition TV broadcasting, pressing
SCREEN SIZE switches among FULL, Dot by Dot, ZOOM, WIDE,
and 4:3.
• If you watch High Definition TV broadcasting with WIDE
selected, part of the screen (e.g., images, graphic interface)
may not appear on the display. If this is the case, select FULL.
• Some HD broadcasts may display 4:3 content with side masks,
which may cause uneven wear. After viewing, it is
recommended to view full screen motion video (see Detecting
side masks on page 68).
then ENTER).
11
67
En