IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE
USING THE APPLIANCE
WARNING
IMPORTANT SAFEGUARDS
Always follow these safety precautions when using this appliance.
Getting Ready
1. Read all instructions.
2. Blade and discs are sharp. Handle them carefully.
3. Turn the appliance OFF, then unplug from the outlet when not in use, before
assembling or disassembling parts and before cleaning. To unplug, grasp the plug
and pull from the outlet. Never pull from the power cord.
4. Do not use outdoors.
5. Do not let cord hang over edge of table or counter.
6. Do not let cord contact hot surface, including the stove.
7. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner. Contact GE Appliances at
the website listed in the Contact Us section for information on examination, repair,
or adjustment.
Operation
1. Keep hands as well as spatulas and other utensils away from moving blade
or discs while processing food to reduce the risk of severe personal injury or
damage to food processor. A plastic scraper may be used, but only when the food
processor motor is stopped.
2. Avoid coming into contact with moving parts. Never push food down by hand when
slicing or shredding. Always use pusher.
3. Make sure motor has completely stopped before removing cover. (If machine
does not stop within 4 seconds after you remove the bowl cover assembly, call
1.866.907.6718 for assistance. Do not use the machine.)
4. Never store any blade or disc on motor shaft. To reduce the risk of injury, no blade
or disc should be placed on the shaft except when the bowl is properly locked
in place and the processor is in use. Store blades and discs as you would sharp
knives, out of reach of children.
5. Be sure cover and feed tube are securely locked in place before operating food
processor.
6. Never try to override or tamper with cover interlock mechanism.
7. Do not fill the bowl above the marked maximum fill line (or rated capacity) to avoid
risk of injury due to damage to the cover or bowl."
Cleaning
READ AND SAVE THESE
49-9000012 Rev. 3
THE CUTTING TOOLS HAVE VERY SHARP EDGES.
INSTRUCTIONS
3