Getting Started - GE G8P0AASSPSS Manual Del Usuario

Getting Started

Before First Use
pusher, blade and discs in warm soapy water.
1. Place the food processor base on a dry, level
countertop with the controls facing you. Do
not plug the unit in until it is fully assembled.
Chopping / Mixing / Dough Blade
1. Place the work bowl on top, with the work
bowl handle just to the right of center. Turn
the work bowl clockwise to lock it onto the
housing base.
2. Carefully lift and place the blade over the
work bowl accessory adapter. Blade should
rest on the bottom of the work bowl.
3. Plug in the housing base.
Slicing, Grating, French fry, and Reversible Shredding Discs
1. Place the work bowl on top of the base,
with the work bowl handle just to the right
of center. Turn the work bowl clockwise to
lock it onto the housing base.
2. Choose desired disc.
3. Insert stem adapter.
4. Carefully place disc over stem adapter, with
the side being used facing up.
Mini Food Bowl
1. Place the work bowl on top of the base,
with the work bowl handle just to the right of
center. Turn the work bowl clockwise to lock
it onto the housing base.
2. Insert stem adapter.
3. Carefully place mini-bowl over the stem
adapter and turn until it locks into place.
4. Carefully place the mini s-blade over the
stem adapter. Blade should rest on the
bottom of the mini-bowl.
Recipe: Honey with Almond
• 400g honey (direct from fridge)
• 300g almond
Recommended Maximum Work Bowl Capacity
Food
Sliced or shredded fruit, vegetable or cheese
Chopped fruit, vegetable or cheese
Pureed fruit of vegetable
Cake batter
Cookie dough
White bread/pizza dough
Nuts or nut butter
49-9000012 Rev. 3
2. With the bowl on the base, use the handle
to turn the work bowl clockwise to lock it
onto the housing base.
4. Add desired ingredients to work bowl.
5. Place work bowl cover on work bowl, with
the feed tube just to the right of center. Turn
clockwise to lock onto work bowl.
6. Align pusher with the feed tube opening on
the work bowl cover and slide down to the
bottom.
7. You are now ready to operate the machine.
5. Place work bowl cover onto work bowl, with
the feed tube just to the right of center. Turn
clockwise to lock onto work bowl.
6. Align pusher with the feed tube opening on
the work bowl cover and slide down to the
bottom.
7. Plug in the housing base.
8. You are now ready to operate the machine.
5. Add desired ingredients to work bowl.
6. Place work bowl cover on work bowl, with
the feed tube just to the right of center. Turn
clockwise to lock onto work bowl.
7. Align pusher with the feed tube opening on
the work bowl cover and slide down to the
bottom.
8. You are now ready to operate the machine.
• 15 sec (high speed)
Capacity
10 cups
4 cups
3 cups cooked: 1 ½ cups pureed
1 ½ pounds
7 cups
8 inch cheesecake batter; 1 box (15.25 oz) cake mix
2 ½ dozen (based on average chocolate chip cookie recipe)
3 cups
9