Test Strip; Water Hardness Table; Water Softener System; Setting - Icecool LVS45A++ Manual De Instrucciones

1.3. Test Strip

4.3. Test Strip
Run water Keep the
through tap strip in
(1min.) water (1sec)
NOTE: Level is set 3 as default. If the water is well water or has a hardness level above 90
dF, we recommend that you use filter and refinement devices.

4.4. Water Hardness Table

Level German dH
1 0-5
2 6-11
3 12-17
4 18-22
5 23-34
6 35-50

4.5. Water Softener System

The dishwasher is equipped with a water softener which reduces the hardness in the
mains water supply. To find out the hardness level of your tap water, contact your water
company or use the test strip (if available).

4.6. Setting

• Turn the knob to the "off" position.
• Push the "Start/Pause" button and hold it down.
• Turn the knob clockwise one step.
• Hold down the "Start/Pause" button until the LEDs flash.
• The machine will display the last setting.
• Set the level by pushing the "Start/Pause" button.
• Turn the knob to the "off" position to save the setting.
4.7. Detergent usage
Only use detergents specifically designed for domestic dishwashers.
Add the recommended amount of detergent for the selected programme to ensure the best
performance.
Keep your detergents in cool, dry places out of reach of children.
See the detergent manufacturer's instructions for a further information.
Shake the Wait
strip. (1min.)
French British
dF dE
0-9 0-6
10-20 7-14
21-30 15-21
31-40 22-28
41-60 29-42
61-90 43-63
EN - 11
Set the hardness level of
your machine.
1
2
3
4
5
6
Indicator
Wash LED is on.
End LED is on.
Start/Pause button is on.
Wash and End LEDs are on.
Wash LED and Start/Pause button are on.
End LED and Start/Pause button are on.