UFESA DH5010 Manual De Instrucciones página 34

appliance.
Fan Speed: Press the fan button to set the desired fan speed between high and low
Display screen: In Auto dehumidifying or drying clothes mode, it will indicate the actual room humidity.
In timing mode, it indicates the setting time.
Set the humidity level: In Auto dehumidifying mode, press the button repeatedly to set humidity from
80% to 30% in 5% increments.
Mode: When power on or timing power on, press this button to choose auto dehumidifying or dry cloth
function. The lights will flash when choose the modes.
On/Off: Press the key to turn on/turn off the dehumidifier.
HOW TO OPERATE
Setting the timer off
When the dehumidifier is running, press "TIMER" (9) to start the function, then press "TIMER" button to
set hours, timing range is from 1 to 24 hours, it will increase 1 hour by each press. When time is up to your
setting, the unit will turn off.
After setting, the timer button will flash 5 times for confirmation.
Setting the timer on
When the dehumidifier is in standby state, press "TIMER" to start the function, then press "TIMER" button
to set hours, when time is up to your setting, unit will turn on.
After setting, the timer button will flash 5 times for confirmation.
AUTO DEHUMIDIFYING MODE
Under this mode, if the room humidity > setting humidity + 5%, the compressor will start, and the fan will
works;
If the room humidity < setting humidity - 5%, the compressor will stop and the fan will work according
to the original setting;
If the setting humidity - 5% < room humidity < setting humidity + 5%, the unit will continue working ac-
cording to the original settings. The initial humidity value is 50%.
DRY CLOTHES FUNCTION
Select that mode to help you drying your clothes faster.
Under this mode, the unit will work regardless of the room humidity.
The fan will work from high speed and its speed is adjustable.
ANTI-FROST FUNCTION
This function will be activated when the ambient temperature falls below 16°C.
34