Publicidad
IMPORTANT WARNING
This appliance is designed for home use and should never be used for commercial or industrial use under any
circumstances. Any incorrect use or improper handling of the product shall render the warranty null and void.
Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the product
label.
The mains connection cable must not be tangled or wrapped around the product during use.
Do not use the device, or connect and disconnect to the supply mains with the hands and / or feet wet.
Do not pull on the connection cord in order to unplug it or use it as a handle
Unplug the product immediately from the mains in the event of any breakdown or damage and contact an
official technical support service. In order to prevent any risk of danger, do not open the device. Only qualified
technical personnel from the brand´s Official technical support service may carry out repairs or procedures
on the device.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for the non-
observance of these warnings.
INSTALLATION
Put the heater on a flat, dry and clean surface. Install the feet as shown on the below drawing.
HOW TO USE:
- Plug the appliance to AC 230V 50-60Hz socket. If you are not sure, we advise you to contact a professional
electrician for more details.
- To start the heater, choose power in 600W(I), 1200W(I+II)
- To stop the heater, turn the switch to the position "0".
- Unplug the product when it' s not in use
15
Publicidad
