Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INSTRUcTIONS, Fig. A
Danger symbol
A reminder to user about high voltage.
Warning symbol
A reminder to user about the necessity of operating exactly according to the
instructions.
When using electrical appliances should take the
following precautions:
• Use the device according to the following in-
structions manual.
• Install the device on a stable surface.
• Use only the tools, which are included in the
product set.
• To protect against risk of electrical shock do
not put the cord in water or other liquid. If
for some reason the water got into the unit,
contact an authorized service center (ASC)
OURSSON AG.
• For power supply, use a power grid with proper
characteristics.
• Do not use the device in areas where the air can
contain vapors of flammable substances.
• Never attempt to open the device by
yourself – it could possibly be the reason
of an electrical shock can lead to product
malfunction and will invalidate the manu-
facturer's warranty. For repair and main-
tenance, contact only authorized service
centers meant for repair of products under
the trademark OURSSON.
• When moved from a cool to a warm place and
vice versa unpack it before use and wait 1-2
hours without turning it on.
• In order to prevent electrical shock do not
immerse the entire product or the wires into
the water.
• Be particularly careful and cautious when using
the device near children.
• Do not touch any hot parts, as this may cause
injury.
• The power cord is specially made relatively
short in order to avoid the risk of injury.
• Do not allow the cord to hang over the sharp
edge of the table or touch hot surfaces.
• Do not connect this device to a grid which is
overloaded with other appliances: it can lead to
the fact that the device will not function properly.
• Do not install the device near gas and electric
stoves and ovens.
• After use, make sure to disconnect the device
from the power grid.
• Keep the device from bumps, falls, vibration and
other mechanical influences.
• Make sure to disconnect the device from the
power grid before cleaning or changing acces-
sories.
• Do not use the device outdoors.
• This appliance is not intended for use by per-
10
EN
sons (including children) with reduced physi-
cal, sensory or mental capabilities, or lack of
experience and knowledge. They can only use
the device under the supervision of the person
responsible for their safety, or after instruc-
tion on the safe use of the device. Do not allow
children to play with the product.
• This product is intended only for use in the
home.
• If the power cord is damaged, it must be
replaced by a specialist from the authorized
service center ( ASC ) OURSSON AG to avoid
danger.
• Use only the tools, which are included in the
product set.
• When cleaning the appliance do not use abra-
sives and organic cleaners (alcohol, gasoline,
etc.). When cleaning the device it is allowed to
use a small amount of neutral detergent.
REcOMMENDATIONS
• Please read the instruction manual before using
the device. Keep the manual after reading for
further use.
• All illustrations in this manual are schematic
representations of real objects, which may differ
from the actual images.
• Do not grind very hard ingredients to avoid
blunting of the blades.
The device is equipped with a safety lock. If the
blender's jar and lid are not installed correctly,
you won't be able to turn on the device.
Do not apply physical force to the device,
as this may damage the device due to the
user's fault.
PRODUcT SET
Measuring cup ...................................................1 pc.
Lid ......................................................................1 pc.
Blender's jar ......................................................1 pc.
Mill (BL0642G)...................................................1 pc.
Blades................................................................1 pc.
Coupling ............................................................1 pc.
Motor unit...........................................................1 pc.
Instruction manual .............................................1 pc.
ELEMENTS OF DESIGN, Fig. B
Measuring cup
Lid
Blender's jar
Blades
Coupling
Motor unit
Rotary switch with buttons
Mill (BL0642G)
UTILIZATION, Fig. C
control panel
Rotary knob – use for following functions:
* Switching the device ON/OFF
* сhanging the speed level from 1 up to 7, where 1 –
minimal speed, and 7 – maximal.
– use this button to turn on turbo mode
– use this button to turn on smoothies mode
– use this button for ice crushing
– ON indicator
– OFF indicator
Before first use, make one preparation cycle
without ingredients, add water into the jar. After
that, wipe the body of the device with a dry soft
cloth. Wash the jar, lid, mill, stainless steel blades
with warm water with detergents.
Before assembling and disassembling the de-
vice, make sure it is unplugged.
The blades are very sharp, be careful.
Utilizing the jar:
1. Place the jar onto the motor unit according to the
manual.
2. Add ingredients. Do not fill the jar above the
max. mark.
3. Plug in the device.
4. Select the required speed, using the knob, from
1 to 7, turning it clockwise. The Mix/Grid process
will start automatically.
GRINDING REcOMMENDATIONS
Before grinding, it is recommended to chop ingredients on 2×2×2 cm pieces. Max amount of ingredients is
shown in the table. Follow the recommendations in the recipe book.
Operation
Smoothies and milk-
1500 ml
—
shakes
Puree from fresh
fruit, berries and
1500 ml
—
MAX (5-7)
vegetables
Puree from cooked
fruits, vegetables and
750 ml
—
MAX(5-7)
soups
5. You may also turn on the blender by holding the
button
. In this case, the device will be working
at maximum speed all the time. The speed won't
change even if you will change the switch's posi-
tion. To turn off the device, release the button.
6. To prepare smoothie press
button. To stop,
press the button again.
7. For ice crushing, press
button. To stop, press
it again.
NOTE: To get ice crumb, select the maximum
speed level, or hold
button for a few seconds. If
the pieces are still big, repeat the operation.
8. To finish working with blender, turn the knob to
position. Unplug the device.
9. After that you can disassemble the device.
You can open the lid only when the jar is
removed.
Before placing the jar, make sure that the
knob is in the
position.
Utilizing the mill:
1. The mill is design to grind coffee beans, rice,
wheat, peeled nuts, pepper, sesame seeds, dried
beans, hard cheese, and breadcrumbs.
NOTE: Always grind cloves, star anise and aniseed
together with other ingredients.
The mill is not designed to grind very hard in-
gredients like nutmeg or ice cubes. Do not fill
the mill's cup higher that the max mark.
2. Open the mill and put necessary ingredients.
Close the jar.
3. Place the mill onto the electric motor as shown on
the picture.
4. Plug in the device.
5. Turn on the blender, hold the fast mix button
To turn of the device relies the button.
Maximum time of continues use of the blender
is 2 minutes, after that you need to turn off the
device for 3 minutes.
Note
60 sec. To turn of the device press
button again.
30-45
The ingredients must be soft or juicy (ba-
sec.
nanas, strawberries, cucumbers, etc.)
30-45
Do not puree ingredients with a temperature
sec.
higher than 95
C
o
.
11
Publicidad
