Worx WG300 Manual De Instrucciones página 11

Cluttered areas invite injuries.
Do not start cutting until you have a clear
work area, secure footing, and a planned
retreat path from the falling tree.
2) Consider work area environment.
Use extreme caution when cutting small
size brush and saplings because the
slender material may catch the saw chain
and be whipped toward you or pull you off
balance.
Do not operate a chain saw in a tree unless
specifically trained to do so.
When cutting a limb that is under tension
be alert for spring back so that you will not
be struck when the tension in the wood
fibers is released.
Don't expose chain saw to rain.
Don't use chain saw in damp or wet
locations.
Do not use chain saw in presence of
flammable liquids or gases.
3) Protect yourself against electric shock
Prevent body contact with grounded
surfaces. For example: metal pipes, wire
fences.
4) Keep children away
Do not let visitors contact the chain saw or
extension cord.
All visitors should be kept away from work
area.
5) Store idle chain saw
When not in use, chain saws should be
stored in a dry, high and locked-up place –
out of the reach of children.
When storing saw, use a scabbard or
carrying case.
6) Don't force chain saw
It will do the job better and safer at the rate
for which it was intended.
7) Use right tool
Cut wood only.
Don't use chain saw for purpose not
intended – for example – Don't use chain
saw for cutting plastic, masonry, non-wood
building materials.
8) Dress properly
Do not wear loose clothing or jewelry.
They can get caught in moving parts.
Rubber gloves and non-skid footwear are
Electric Chain Saw
recommended when working outdoors.
Wear protective hair covering to contain
long hair.
9) Use safety glasses/safety visor
Also use safety footwear; snug fitting
clothing; protective gloves; hearing and
head protection.
10) Carrying saw
Carry the chain saw by the front handle
with the saw stopped, finger off the switch,
the guide bar and saw chain to the rear.
11) Maintain Chain saw with care
Inspect chain saw cords periodically and
if damaged, have repaired by authorized
service facility.
Keep cord clear of the chain and operator
at all times. Never carry saw by the cord or
pull it to disconnect from receptacle. Keep
cord from oil and sharp edges.
Inspect extension cords periodically and
replace if damaged.
Keep tools sharp and clean for better and
safer performance.
Follow instructions for lubrication and
changing accessories.
Keep handles dry, clean, and free from oil
and grease.
12) Disconnect chain saw
Disconnect chain saw when not in use,
before servicing, and when changing
accessories and attachments, such as saw
chain and guard.
13) Outdoor use extension cords
Use only extension cords intended for use
outdoors and so marked.
14) Stay alert
Watch what you are doing. Use common
sense. Do not operate chain saw when you
are tired.
Keep all parts of the body away from the
saw chain when the motor is operating.
Before you start the saw, make sure the
saw chain is not contacting anything.
15) Check damaged parts
Before further use of the chain saw, a
guard or other part that is damaged should
be carefully checked to determine that
it will operate properly and perform its
intended function. Check for alignment of
moving parts, binding of moving parts,
11
En