Advanced Functions; Technical Characteristics - Comelit SK9011/A Manual Tecnico

Advanced functions

EVENT MANAGEMENT
The SK9011/A unit stores the last 1000 events in
its memory (access authorised, access refused,
cancelled transmitter, etc.)
Providing the SK9013 reader unit has been
previously networked to the control unit, events
can be recovered using transfer token ref. SK9053 ,
supplied separately.
After initialising it with the SIMPLEKEY ADVANCED
software, place the transfer token in front of the
reader until the green LED stops flashing. Once
saved, you just have to put it in the encoder linked
to the micro-computer and follow the software
instructions to transfer the events in the database.
NETWORK MODE
It is possible to network the various system units in
order to take advantage of the following functions
from the management micro-computer:
• Modifying unit parameters
• Setting the date and time
• Retrieving events automatically or on command
• Remote opening command
• Immediate deletion of a lost transmitter
It is possible to network up to 32 units in one system.
• An RS485 wired network using a USB converter
ref. SK9073 (one per system) - a maximum of 32
units.
It is vital to record on the unit the same logical
address as the one recorded in the software.
To do this
f Use the S1 push button giving the pulse
number corresponding to the address (between
1 and 32)
f Validate it by holding the S1 push button down
for 5 seconds.
For detailed use of the functions please refer to the
SIMPLEKEY ADVANCED software instructions.

TECHNICAL CHARACTERISTICS

• Capacity: 30 building codes
• Opening time can be adjusted from between 1
and 99 seconds.
• Output via dry contact max. 60W (5A at 12 Vdc or
2,5A at 24Vdc)
• Power consumption: 50 mA when idle, 100 mA
when relay active
• Operating temperature: -10°c - +55°c
• Operating voltage: 12 at 24 Vac or 12 at 33 Vdc
• Dimensions (H X L X D): 55 x 85 x 20 mm
• Coverage 50 metres in a free field (indicative)
OPTIONAL EXTRA: OFFSET AERIAL SK9014
This may be used to improve the range of the
receivers and may have to be used when the receiver
is put in a metal casing or is close to large amounts
of metal.
5