SettingAndStoringPersonalDataInMemory - Tanita UM-041F Manual De Instrucciones

SETTING AND STORING PERSONAL DATA IN MEMORY
General Programming
You will receive readings only if data has been programmed into one of the personal data memories or the Guest mode.
1. Turn on Power
Use the Set button to activate the unit.
Note: If you don't operate the unit for sixty seconds after the unit has been turned on, the
unit will turn off automatically.
Note: If you make a mistake or want to turn the unit off before you have
finished programming it, press the Weight-Only Key(
2. Select Personal Data Number
Personal data numbers store your personal data.
Use Up/Down buttons to select a personal data number.
Press Set.
3. Set Age
Use Up/Down buttons to select age.
Press Set.
4. Select Female or Male
Use Up/Down buttons to select Female (
Press Set.
5. Specify Height
Use Up/Down buttons to select height.
Press Set.
The unit will beep twice and the display will flash all data three
times to confirm the programming. The power will then shut
down automatically.
Warning
Do not use the body fat reading feature of this product if you have a pacemaker or other implanted electronic medical device.
6
)to force quit.
) or Male ( ).