TakingWeightAndBodyFatReadings; ProgrammingTheGuestMode; TakingWeightMeasurementOnly - Tanita UM-041F Manual De Instrucciones

TAKING WEIGHT AND BODY FAT READINGS
Take a Reading
After programming your personal data you are ready to take a reading.
Select Personal Data Number
Press the "Up" arrow button to turn the unit on.
Press the "Up/Down" arrow buttons to select personal data number.
Press the set button.
The unit will beep and the display will show "0.0".
Now step onto the platform.
Note:
•If you step onto the platform before "0.0" appears the display will show "Error" and you will not obtain a reading. Furthermore, if you do not step onto the measuring platform within about
30 seconds after "0.0" appears, the power is shut-off automatically.
•When using the "Up" button to turn the unit on, the personal data number last used will appear first.
•Numbers that are not pre-programmed are automatically skipped.
Get Your Readings
Your weight will be shown first. Continue to stand on the platform.
"00000" will appear on the display and disappear one by one from left to right.
The readings will be shown alternately 3 times as follows:
Weight Body fat percentage Total body water percentage
Note:Do not step off until Body Fat % is shown.
Note:For children (age 7-17), the unit will only display the Weight and the Body Fat % (it will not display the Healthy Range Indicator).
Recall Function
To obtain previous readings, press the SET button while the current readings are being displayed.
Press the SET button again to go back to the current Weight and Body Fat % result display.
PROGRAMMING THE GUEST MODE
Guest Mode
Guest mode allows you to programme the unit for a one-time use without resetting
a Personal data number.
Press the Down button to activate the unit. Then follow the steps: Set Age, Select Female or Male,
and Specify Height.
Note:If you step onto the platform before "0.0" appears the display will show "Error" and you will not obtain a reading.
TAKING WEIGHT MEASUREMENT ONLY
Select Weight-Only Mode
Tap the Weight-Only key to select Weight only mode.
7