Displaying Temperature Trends; Battery State Display; Replacing The Batteries - Auriol Z31743A Manual Del Usaurio

Press the SET / RESET button
maximum and minimum values, are being dis-
played to reset the values.
Press the SELECT button, to return to the
default display.

Displaying temperature trends

After successfully connecting with the outdoor
sensor, the temperature station can display the
temperature trend (outdoor)
ture trend (indoor)
You may see the following displays:
= The temperature is rising.
= The temperature is constant.
= The temperature is falling.

Battery state display

The
3
temperature station's LC display if the batteries in
the outdoor sensor or the temperature station are
weak.

Replacing the batteries

Open the battery compartment
Remove the exhausted batteries.
Insert two new 1.5 V
battery compartments.
Note: Make sure you fit the batteries the
right way round (polarity). This is shown in
the battery compartments (see Figs. C + E).
Close the battery compartments.
90 GB/MT
.
5
and
7
20
and the tempera-
1
symbols appear in the
batteries (AA) into the
while the
or .
24 30