Specifications - Snapper SPX 150 Serie Manual Del Operador

ENGINE
Briggs & Stratton
Model Professional Series
Horsepower 22 Gross HP @ 3600 rpm
Displacement 40,03 cu in. (656 cc)
Electrical System Alternator: 9 amp Regulated
Battery: 12V-230 CCA
Oil Capacity 64 oz (1,9 L)
Engine Oil Synthetic 5W30
Spark Plug Gap 0.030 in. (0,76 mm)
Spark Plug Torque 180 in-lbs (20 Nm)
Fuel Tank Capacity 3.5 gal (13,2 L)
Briggs & Stratton
Model Professional Series
Horsepower 23 Gross HP @ 3600 rpm
Displacement 44.2 cu in. (724 cc)
Electrical System Alternator: 9 amp Regulated,
Battery: 12V-230 CCA
Oil Capacity 64 oz (1,9 L)
Engine Oil Synthetic 5W30
Spark Plug Gap 0.030 in. (0,76 mm)
180 in-lbs (20 Nm)
Spark Plug Torque
Fuel Tank Capacity 3.5 gal (13,2 L)
CHASSIS
9-Position
Seat Adjustment
Turning Radius 14 in. (35,6 cm)
Tire Size: 15 x 6.0
Front Wheels
Inflation Pressure: 12-14 psi (0,82 -0,96 bar)
Rear Wheels Tire Size: 20 x 10.0-8
Inflation Pressure: 10 psi (0,68 bar)
Power Rating
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engi-
neers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and cor-
rected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are
derived at 3600 RPM. The gross power curves can be viewed at www.BRIGGSandSTRATTON.COM. Net power values are
taken with exhaust and air cleaner installed whereas gross power values are collected without these attachments. Actual
gross engine power will be higher than net engine power and is affected by, among other things, ambient operating condi-
tions and engine-to-engine variability. Given the wide array of products on which engines are placed, the gas engine may
not develop the rated gross power when used in a given piece of power equipment. This difference is due to a variety of fac-
tors including, but not limited to, the variety of engine components (air cleaner, exhaust, charging, cooling, carburetor, fuel
pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine
variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power
for this Series engine.
Parts and Accessories
See an authorized dealer.
en
, V-Twin
TM
, V-Twin
TM
TRANSMISSION
Make Hydro Gear T2-HP
Type Foot Pedal Hydrostatic
Ground Speed Forward: 0-5.6 MPH (0-9,0 km/h)
Reverse: 0-3.5 MPH (0-5,6km/h)
Drive Belt
Brakes Manual
MOWER DECK
Cutting Width
Base Deck Platform
Number of Blades/Type
Frame Suspension
Deck Support Wheels/Number Standard, 4 Anti-Scalp Wheels
Height-of-Cut
Mower Lift
Cutting Positions
DIMENSIONS
Overall Length
Overall Width
Overall Height

Specifications

46" (116,8 cm)
52" (132,1 cm)
Side Discharge
3, Standard Lift
Frame Hung
1.5" to 4.0" (3,8 to 10,2 cm)
Manual
7
71" (180,3 cm)
54" (137,2 cm)
45" (114,3 cm)
29