Algodue ELETTRONICA UPM309 Manual Del Usuario página 75

Re g i ste r d es c ript io n
INSTRUMENT GENERAL SETUP
Analog output mode and parameter
Analog output low threshold
Analog output high threshold
Number of the stored AVG or MIN/AVG/MAX recordings
(according to the instrument model)
Timestamp of the first AVG or MIN/AVG/MAX recording
(according to the instrument model)
Timestamp of the last AVG or MIN/AVG/MAX recording
(according to the instrument model)
Status of AVG or MIN/AVG/MAX recording (according to
the instrument model)
Mode of AVG or MIN/AVG/MAX recording (according to the
instrument model)
Rate of AVG or MIN/AVG/MAX recording (according to the
instrument model)
Reserved
Available only for instrument with Analog output.
MODBUS RTU/ASCII, TCP
INTE G E R
F. code
Register
(Hex)
Words
(Hex)
03 / 04 / 10 2082 2
03 / 04 / 10 2084 4
03 / 04 / 10 2088 4
03 / 04 2100 2
03 / 04 2102 2
03 / 04 2104 2
03 / 04 2106 2
03 / 04 / 10 2108 2
03 / 04 / 10 210A 2
03 / 04 / 10 210C 6
P ro gr a mmabl e dat a
Format: 0000 XXYY, where:
XX=AO parameter
YY=AO mode
AO parameter:
Refer to the "Parameter codes"
table
AO mode values:
$00=disabled
$01=0-20 mA
$02=4-20 mA
e.g. $0000$0902=AO programmed
with phase 2 current parameter (A2)
and enabled in 4-20 mA mode
LOW full scale value of the set
parameter, assigned to 0 or 4 mA. The
measuring unit changes according to
the set parameter.
HIGH full scale value of the set
parameter, assigned to 20 mA. The
measuring unit changes according to
the set parameter.
e.g. $007F=127 recordings
UnixTime format. Convert the read
hexadecimal value in decimal format.
e.g. $522E$5FD4=1378770900
>09/09/13, 23:55:00
UnixTime format. Convert the read
hexadecimal value in decimal format.
e.g. $522E$5FD4=1378770900
>09/09/13, 23:55:00
Bit encoding:
b1(LSb)=status (0=stopped, 1=active)
b2=memory full (0=no, 1=yes)
b3=memory overwritten (0=no, 1=yes)
e.g. $0000$0002=010
>recording stopped, memory full
and no memory overwritten
$01=fill, $02=ring
BASIC instrument version:
$00=disabled
$01=01 minute
$05=05 minutes
$0A=10 minutes
$0F=15 minutes
$1E=30 minutes
$2D=45 minutes
$3C=60 minutes
ENH instrument version:
$0000=disabled
$0001...$0E10 (1...3600 s, with 10 s step)
75