Appliance Wall Hang - Aparici SIE030N Manual Del Usuario Y Del Instalador

Ver 2_ES_EN_FR_IT_PT
CONNECTIONS
DIAMETER
VERTICAL /
HORIZONTAL
D - UNIVERSAL
VERTICAL
POSITION
1.- BUILDING-IN.
The water heater shall be built-in as close as possible to the outlets in order to reduce the heat loses.
The building place must be chosen considering the maximum reduction of 90º elbows in water
connections and, at the same time, make easy the substitution of the heating element.

2.- APPLIANCE WALL HANG

Due to its particular design, the APARICI electrical water heaters could be installed in three positions as
you could see at fig-2.1, 2.2 and 2.3:
1. Vertical. At this position cold water inlet pipe (F) is on the right side and hot water outlet pipe (C) on the
left side. The hydraulic safety valve supplied with the appliance must be installed at the inlet cold water
pipe (F).
MODEL SIE030N SIE050N
WATER
G1/2'
Ø380
A 548
B 380
C 210
D
E
F
fig.-1 – Model APARICI SIExxxN/SIE075S
DIMENSIONS
SIE075S SIE075N
G1/2' G1/2' G1/2'
Ø380 Ø380 Ø450
748 1042 813
380 380 470
420 420 450
265
210 - 350
270
395
Fig. 2.1
10
SIE100N SIE120N
G1/2' G1/2'
Ø450 Ø450
963 1123
470 470
610 610
355
210 - 440
340
465