Samsung NE63 831 Serie Manual Del Usuario página 10

Ocultar thumbs Ver también para NE63 831 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Important safety instructions
Important safety instructions
Be sure you know which control knob operates each surface
unit. Make sure you turned on the correct surface unit.
Always turn the surface units off before removing cookware.
When preparing flaming foods under the hood, turn the fan on.
Keep an eye on foods being fried at high or medium high
heat settings.
Do not store heavy items above the cooktop surface that
could fall and damage it.
Do not use decorative surface element covers – If an element
is accidentally turned on, the decorative cover will become
hot and possibly melt. Burns will occur if the hot covers are
touched. Damage may also be done to the cooktop.
ELECTRICAL SAFETY
Proper Installation - Be sure your appliance is properly
installed and grounded by a qualified technician.
The appliance should be serviced only by qualified service
personnel. Repairs carried out by unqualified individuals
may cause injury or a serious malfunction. If your appliance
is in need of repair, contact a Samsung authorized service
center. Failure to follow these instructions may result in
damage and void the warranty.
SAVE THESE INSTRUCTIONS
10 English
NE63T831_AA_DG68-01211A-00_EN.indd 10
Flush-mounted appliances may be operated only after they
have been installed in cabinets and workplaces that conform
to the relevant standards. This ensures that the appliances
are installed in compliance with the appropriate safety
standards.
If your appliance malfunctions or if fractures, cracks, or
splits appear:
-
switch off all cooking zones
-
unplug the range from the AC wall outlet
-
contact your local Samsung service center.
WARNING
If the surface is cracked, switch off and unplug the appliance to avoid
the possibility of electrical shock. Do not use your cooktop until the
glass surface has been replaced.
WARNING
Ensure that the appliance is switched off before replacing the
lamp to avoid the possibility of electric shock.
The range should not be placed on a base.
2020-03-25
4:02:48

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido