Emptying The Drum; Powerhead; Emptying Dust Drum; Blowing Feature - RIDGID 4000RVM0 Manual Del Usuario

Operation (continued)

Emptying the Drum

WARNING:
To reduce the risk of injury from
accidental starting, unplug power
cord before emptying the drum.
1. To remove the Powerhead to empty
contents of the Dust Drum, simply lift
the two Drum Latches on the side of
the Vac and lift the Powerhead up and
off the Dust Drum and set to the side.
2. Lay the Powerhead upside down on
a clean dry area while emptying the
Drum or changing the Filter.
3. Dump the Drum contents into the
proper waste disposal container.
SP7095 4000RVM0 SE.indd 31

Blowing Feature

Your Wet/Dry Vac has the capability to
be used as a Blower for yard work,
patio cleanup and workshop applications
to blow sawdust and other debris.
Always
complying with ANSI Z87.1 (or in
Canada, CSA Z94.3) before using as
a blower.
To reduce the risk of injury to
bystanders, keep them clear of

Powerhead

blowing debris.
CAUTION: Wear a dust mask if
!
blowing creates dust which might
be inhaled.
Dust
Drum
CAUTION: To reduce the risk of
!
Drum
hearing damage, wear ear protectors
Latch
when using the Vac/Blower for
extended time or in a noisy area.
19
WARNING:
wear safety
WARNING:
eyewear
11/26/18 1:37 PM