Setting Fonts Using The Font Setting Card; Cleaning Cards - Star TCP400 Serie Manual Del Usuario

6. Setting Fonts Using the Font Setting Card

European, US and Korean bound models are provided a standard font setting card that
is for their country. Before using the reader/writer, set the fonts according to the direc-
tions below.
<Procedures to Set Fonts>
1. Turn the power ON while pressing the Cleaning switch.
2. The buzzer will ring and the green status lamp will flash. This indicates that the
reader/writer has entered the "setting mode to use the setting card."
3. Insert the font setting card. The font setting information is automatically read from
the magnetic strip. That new font setting information is then written to the internal
memory.
4. When the new settings have been completed successfully, "COMPLETE!" is printed
and the card is discharged. The reader/writer will then return to its normal operating
status.

7. Cleaning Cards

A cleaning card is used to clean the transport rollers inside the unit. Two cleaning cards
accompany each unit. They are in the plastic wrap.
7-1 External Shape
Font Setting Card
Cleaning Switch
85.6
89.6
Status Lam p
Felt Surface
– 6 –
Felt Surface