Amplicom PowerTel 500 Guia Del Usuario página 27

Note: If no one picks up the call being transferred, re-answer the call at the
current phone by pressing
Make an internal call
If two or more handsets are registered to the base internal calls between
handsets can be made. Each handset will have been allocated a handset
number when registered, e.g. HS1, HS2 etc. These calls are free of charge.
1. Press and hold
number of the handset desired.
2. To accept the call on the receiving handset, press
3. End the call by pressing
Make a conference call
1. During an external call, press and hold
enter the internal call number of the handset to transfer to.
2. To accept the call on the receiving handset, press
3. Once the call has been received on the other handset , activate the conference call
by pressing and releasing the
4. Place the external call on hold by pressing
5. The conference call will end when
1-866-AMPLICOM (267-5426)
.
. The display will show Handset? Enter the internal call
.
button.
A
DDING A
.
until a short beep is heard, then
.
(if necessary).
is pressed.
H
ANDSET
27