Amplicom PowerTel 500 Guia Del Usuario página 31

Set the dial mode
There is a choice of two dialing modes: tone and pulse. The default setting is
TONE and this is the correct setting for use within the United States.
To change the dial mode
1. Open the menu by pressing
is highlighted and press
2. Scroll using
3. The current dial mode setting (e.g. Tone) is displayed.
4. Choose the dial mode setting required (Tone or Pulse) using
press .
Reset to default settings
Important: Reseting to default will NOT delete phone book entries.
To reset to default settings
1. Press for 10 seconds.
2. Confi rm or cancel the reset to default settings by pressing
1-866-AMPLICOM (267-5426)
, scroll using
.
or until Dial Mode is highlighted and press
U
SE ON A PRIVATE BRANCH EXCHANGE
or until Base settings
.
or and
or .
31