Tape Operations; Listening To A Cassette - JVC KS-FX210 Manual De Instrucciones

Ocultar thumbs Ver también para KS-FX210:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TAPE OPERATIONS

Listening to a cassette

You can playback type 1 (normal) tapes.
1
Turn on the power.
/I/ATT
Note on One-Touch Operation:
If a cassette is already in the cassette compartment,
tape play starts automatically. However, it is not
recommended to leave the cassette in the compartment
when turning off the power or ignition key. It may
damage the tape head and the cassette.
2
Insert a cassette into the cassette
compartment.
3
Select the tape direction.
10
When one side of the
tape reaches its end
during play, the other
side of the tape
automatically starts
playing. (Auto Reverse)
Press both buttons at
the same time.
PROG
Each time you press both
buttons, the tape direction
changes alternately –
forward (
reverse (
To stop play and eject the cassette.
Press 0.
Tape play stops and the cassette automatically
ejects from the cassette compartment. The source
changes to the previously selected one.
• You cannot change the source if the cassette is
still in the cassette compartment.
To change source, you must eject the cassette
first.
• You can also eject the cassette by pressing 0
while the unit is turned off.
To fast-wind a tape.
Press in ¡ or 1.
The tape will be wound in the direction of the
arrows (¡ or 1).
) and
).
To restart playback, lightly press the other
button which is not pressed in (1 or ¡).
PROG
Tape direction

Publicidad

Tabla de contenido
loading

Tabla de contenido