Dry Ironing; Steam Ironing - Domo DO7106S Manual De Instrucciones

Plancha con generador de vapor
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 40
particles are harmless and will disappear after a while.
· When turning on the appliance, the steam generator may produce a pumping sound. This
is normal. This sound indicates that water is pumped into the steam generator.
· While the soleplate is heating up, some steam will be released automatically. This
is also normal and will last for about 3 seconds.
USE
This steam generator offers 2 options: dry ironing or steam ironing. Follow the instructions
below. Also carefully read the ironing tips at the end of this section before using the appliance.

DRY IRONING

1.
Place the iron on the thermal insulation pads of the steam generator.
2.
Plug in the appliance and press the on/off button.
3.
Select the desired temperature with the temperature dial, according to the kind of fabric
that needs to be ironed. The temperature indicator will light up and the iron will start
heating up.
4.
When the temperature indicator goes out, the selected temperature has been reached.
You can now start ironing.
Caution: Never touch the hot soleplate!

STEAM IRONING

Caution: do not plug in the appliance yet at this point.
1.
Grab the water tank of the steam generator by the handle and pull the trigger on the
inside of the handle to pull the water tank out of the generator. Open the filling cap and
fill the water tank with water. Make sure that you do not exceed the maximum level (1.2
L). Close the filling cap after filling the water tank.
2.
Place the water tank back into the steam generator.
3.
Place the iron on the thermal insulation pads of the steam generator.
4.
Plug in the generator, press the on/off button. Set the temperature dial to the desired
temperature, according to the kind of fabric, and the temperature indicator will light up.
5.
The water in the water tank will start heating up and
after a couple of minutes the temperature indicator will
go out. This indicates that the soleplate has reached
the set temperature. When the steam indication light
colours blue, you may start ironing.
Attention: make sure that the temperature dial is
positioned into the steam area (indicated by
Caution:
Never touch the hot soleplate!
Never aim the steam at people!
36
DO7106S
).

Publicidad

Tabla de contenido
loading

Tabla de contenido