Clean the unit and storage
Clean the unit
•
When the unit is contaminated, clean it gently with a wrung towel using tepid water below 40°C.
Storage
•
Empty the water collection tray following the instructions in the previous section.
•
Run the unit in Fan mode during 12 hours in a warm room to dry and prevent mold growth.
•
Turn off the device and unplug it.
•
Clean the air filter according to the instructions in the previous section. Reinstall the dried and
clean filter before storing the unit.
•
Remove the batteries from the remote control
•
Make sure to store the unit in a dark, cool place. Direct exposure to the sun or extreme heat can
shorten its life.
Note
The dust on the front control panel can be removed with an oil-free cloth or washed
with a cloth moistened with a solution of warm water and mild dishwashing liquid. Rinse
thoroughly and wipe. Never use strong cleaners, wax or luster on the front of the unit.
Make sure to wring out the cloth before wiping the control panel. Excess water in or
around the control panel can damage the unit.
EN
38