Technical Characteristics - Mestra TERRA I Manual De Instrucciones

PRECAUTIONS
♦ Never exceed a pressure of 5 bars.
♦ Always work with the booth lid closed, and use suitable protective goggles and a face-mask.
♦ Connect the booth outlet tube to an exhauster, and adjust the pressure inside the booth via
the stoppers on the right-hand side.
♦ Do not use the bag filter supplied with the unit on a permanent basis: it is for short-term use
only in unforeseen or temporary circumstances.
♦ If the rubber gloves become damaged or torn, replace them immediately.
♦ Do not allow children or unskilled personnel to handle the unit.
♦ Use only guaranteed high-quality grinding media (we recommend MESTRA media). Low
quality media can be toxic if dust is inhaled.
♦ Connect the inside light to 230 V 50/60 Hz with earth.
♦ Ensure that the compressed air system used to power the unit is properly protected by at
least one pneumatic discharge valve.
♦ If leaks are detected in the compressed air system, consult your installer immediately.

TECHNICAL CHARACTERISTICS

Height:
Length:
Width:
Weight:
Voltage:
Rated power air:
Lighting:
Terra I
365 mm
380 mm
340 mm
7.5 kg
230 V, 50/60 Hz 230 V, 50/60 Hz
100 l/min
LED 6 W
Terra II Terra III
390 mm 390 mm
470 mm 470 mm
410 mm 410 mm
9 kg
230 V, 50/60 Hz
100 l/min 100 l/min
LED 6 W LED 6 W
10.5 kg
English
11