Quick Start - Phonic NEXUS 540 Manual Del Usuario

2. Connect the output from the signal source (mic- or line-level source) to the XLR-type female input jack.
The NEXUS accepts balanced or unbalanced mic- or line-level signals from dynamic microphones,
mixers, preamps, CD players, tape decks. etc.
Note: The NEXUS will only accept input from condenser microphones that have their own power supply.
or 220-240 VAC 50 Hz). Plug the AC power cord into the IEC socket on the back of the NEXUS active
Switch on the NEXUS power switch(down).
Slowly turn up the level control on the NEXUS until you achieve the desired volume. Make sure that
If there is no sound, first turn the NEXUS level control all the way down before investigating. When you
NEXUS 540 5