Settings - Call Signaling; Switching The Flash On/Off; Switching The Call Signal On/Off; Setting Call Signal Volume - HumanTechnik flashtel comfort II LB f Instrucciones De Servicio

Settings – Call signaling

Switching the flash on/off

You can also have incoming calls signaled by a flashing light. The flashing light appears on
the back of the telephone.
1. Press P and then
2. Then enter one of the two following codes:
a. Code "40" to switch the flash off.
b. Code "41" to switch the flash on;
the flash symbol will appear in the telephone display.
3. Press P to store the settings.
4. Enter another code or press P to quit the settings menu.
Note:
The flash will not work during a power failure!

Switching the call signal on/off

1. Press P and then
2. Enter one of the following two codes:
a. Code "20" switches the call signal off.
b. Code "21" switches the call signal on.
3. Press P to store the settings.
4. Enter another code or press P to quit the settings menu.
Setting the volume of the call signal
The volume of the call signal can be adjusted by moving the sliding switch on the back of
the telephone.

Call signal tone

You can select from between 7 different acoustic call signals.
1. Press P and then
2. Enter code "23". The current signal setting will appear in the display.
3. Press number keys 1-8 to alter the call signal.
4. Press P to store the settings.
5. Enter another code or press P to quit the settings menu.
44 English
.
#
.
#
.
#