Dvi (Digital Visual Interface) Input Connection; Program Out Connection; Special Remote Butttons - Panasonic CT-32HL43 Instrucciones De Operación

Optional Equipment Connections (cont.)

DVI (Digital Visual Interface) input connection

(for models CT-32HL43 and CT-36HL43 only)
1
The DVI/HDCP input on your TV can accommodate copy
protected digital programming. The DVI/HDCP input
terminal complies with the EIA-861Profiles
not intended for use with personal computers. The DVI/
HDCP input can be connected to an EIA/CEA 861
compliant consumer electronic device, such as a set top
box or DVD player equipped with a DVI output connection
The DVI/HDCP input is designed for best performance with
HDTV signals, such as 1080i. The DVI/HDCP input will
also accept and display 480i and 480p picture signals.
Notes:
1. DVI/HDCP = Digital Visual Interface / High-Bandwidth
Digital Copy Protection.
2. EIA/CEA-861 Profiles compliance covers profiles for
transmission of uncompressed digital video including
high bandwidth digital content protection.
3. Consult your consumer electronics dealer for availability
details.
Follow the diagram below to connect the TV to a set top
box or a DVD player.
Procedure
• Press TV/VIDEO button on the remote control to select
DIGITAL-IN input.
• Connect the DVI output from the set top box or a DVD
player to the DVI input on the back of the TV.
• Connect the Audio Out signal from the set top box or
DVD player to the Audio In input associated with the
DIGITAL INPUT.
Note: This HDTV Monitor is not intended to be used with a PC.
Program Out Connection (PROG OUT)
To use the television audio and video with optional equipment,
connect the PROG OUT and TO AUDIO AMP connections on the
back of the television.
Note:
2
standard and is
3
.
Procedure
•
•
•
Special Remote Buttons
ASPECT Button
The ASPECT button on the remote control lets you select
the picture size ratio to match programming format when
using DTV STB or DBS.
BBE Button
Press this button to turn the BBE VIVA 3D feature
(available in CT-36HL43 and CT-32HL43 only) or BBE
sound feature On or Off.
SAP Button
Press this button to let you cycle through different audio
modes. If you are receiving a stereo program and you
press the SAP button, you can cycle between STEREO
and MONO.
O E
PTIONAL QUIPMENT
If the Main Picture signal is Component Video Input, no
Program out signal will be available..
TERMINALS ON BACK OF TV
CABLES NOT SUPPLIED
Connect optional equipment to PROG OUT a ndTO
AUDIO AMP terminals.
PROG OUT terminal display is the same as on-screen
display.
See optional equipment manual for further instructions
for recording and monitoring.
C
ONNECTIONS
MONITOR VCR
O R
®
7 l