Rinsing Time Per Cycle - LG GCWL1069CS4 Manual De Instrucciones

52
PROGRAMMING MODE - SETUP MODE
19. Rinsing times per cycle
can be used to set the number of rinses for each cycle.
Enter setup mode.
You will see LqC1
Press the Hot button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm or the Cold button until
in the display.
Press the Start button. Display
Press Warm or Cold button to select course.
: Hot course
: Warm course
: Cold course
: Delicates course
: None (only for Heater model)
Press the Start button.
Display previous rinsing times per cycle.
Press Warm(+) or Cold(-) button to select rinsing times
per cycle. (Max 5, Min 1)
Press the Start button.
The machine sets up the rinsing times per cycle, then
advances to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the Hot button three times.
Button
.
Display
appears
appears