Publicidad
Idiomas disponibles
Idiomas disponibles
Introduction
The Southwire 30020S Infrared Thermometer measures surface
temperature without contact from -58° to 900°F (-50° to 482°C).
With a 10:1 distance to spot ratio, this device includes Min/Max readings,
4-digit backlit display, laser pointer and auto power off. Proper use and
care of this meter will provide many years of reliable service.
SAFETY
• Use extreme caution when the laser beam
is turned on.
• Do not aim the laser beam at anyone's eye or let
the laser beam strike the eye from a reflective surface.
• Do not use meter near explosive gases, vapors or dust.
• To avoid burns, understand that reflective objects can be
much hotter than the meter indicates.
• Replace the battery as soon as the low battery warning
appears on the LCD display.
• Do not use the meter if it appears damaged or is operating improperly.
• This product is intended for commercial and industrial use only.
It should not be used for medical evaluations.
Maintenance
This meter is designed to provide years of dependable service, if the following
care instructions are performed.
• KEEP THE METER DRY. If it gets wet, wipe it off.
• USE AND STORE THE METER IN NORMAL TEMPERATURES. Temperature extremes
can shorten the life of the electronic parts and distort or melt plastic parts.
• HANDLE THE METER GENTLY AND CAREFULLY.
Dropping it can damage the electronic parts or the case.
• KEEP THE METER CLEAN. Wipe the case occasionally with a damp cloth.
DO NOT use chemicals, cleaning solvents, or detergents.
• USE ONLY FRESH BATTERIES OF THE RECOMMENDED SIZE AND TYPE.
Remove old or weak batteries so they do not leak and damage the unit.
• IF THE METER IS TO BE STORED FOR A LONG PERIOD OF TIME,
the batteries should be removed to prevent damage to the unit improperly.
1
Meter Description
1. Laser Pointer Beam
1.
2. IR Sensor
2.
3. LCD display
4. °C/°F selection button
5. MAX/MIN record button
6. Laser on/off button
7. Backlight on/off button
8. On/Measurement trigger
9. Battery cover
10. Handle grip
Display Description
1. SCAN, meter is taking measurements
2. Display HOLD
3. Laser on symbol
4. Emissivity (fixed at 0.95)
5. Temperature units
°C (Celsius)/°F (Fahrenheit)
6. Low battery indicator
7. Temperature reading
8. MAX/MIN indicator
3.
5.
6.
8.
9.
10.
3.
2.
1.
8.
7.
2
4.
7.
4.
5.
6.
Publicidad
